隨著物流產業的快速發展，許多企業都需要采用集裝箱來進行運輸，在進行集裝箱運輸時，在裝貨方面有哪些注意事項？下面濟南集裝箱廠家為您分析：

With the rapid development of the logistics industry, many enterprises need to use containers for transportation. What are the precautions in loading when carrying out container transportation? Below, Jinan container manufacturers will analyze for you:

1.裝貨時要使箱底上的負載均衡，尤其要嚴格禁止負載偏移一端的情況。

1. When loading, the load on the bottom of the box should be balanced, especially when the center of gravity of the load deviates from one end.

2.當裝箱率達到90%時，裝柜子就得更加小心。

When the packing rate reaches 90%, it is necessary to be more careful when loading containers.

3.貨柜拖到貨柜后，要先檢查，拿柜子上的紙核對箱號，保管好司機交給你的鉛封，記下鉛封號碼。

3. After the container is towed to the container, it is necessary to inspect it first, check the box number with the paper on the container, keep the lead seal handed over to you by the driver, and record the lead seal number.

4.集裝箱避免了集中裝載的問題，如在裝載機械設備等貨物時，箱底應鋪有木板等襯墊材料，盡可能分散貨物的重量。

4. Containers avoid the problem of centralized loading. For example, when loading mechanical equipment and other goods, the bottom of the container should be covered with lining materials such as wooden boards to disperse the weight of the goods as much as possible.

5.當貨物裝柜時，箱內所裝貨物的重量不得超過集裝箱的大裝載重量，即集裝箱總數減去集裝箱自重。集裝箱的箱門上通常標有總重和自重的標記。

When the goods are loaded into a container, the weight of the goods inside the container shall not exceed the maximum loaded weight of the container, that is, the total number of containers minus the self weight of the container. The door of a container is usually marked with the total weight and self weight.

6.裝板貨物時，應準確掌握集裝箱內部尺寸及包裝貨物的外部尺寸，以便計算裝板數量，以大限度地減少棄置，多裝多裝。

6. When loading goods on pallets, it is necessary to accurately grasp the internal dimensions of the container and the external dimensions of the packaged goods, in order to calculate the number of pallets to minimize disposal and load more.

7.集裝箱運輸中，每一個集裝箱的單位重量是一定的，所以當在箱內裝同一種貨物時，只要知道貨物的密度，就可以判斷出貨物是輕是重。

In container transportation, the unit weight of each container is fixed, so when loading the same type of goods inside the container, as long as the density of the goods is known, it can be determined whether the goods are light or heavy.

上述集裝箱裝貨注意事項我們都很重視，在集裝箱運輸中，掌握以上幾點是十分必要的，可以保證運輸?shù)恼＿M(jìn)行。更多相關內容就來我們這里http://www.cp-talk.com.cn咨詢看看！

We attach great importance to the above precautions for container loading. In container transportation, it is necessary to master the above points to ensure the normal operation of transportation. Come to us for more relevant content http://www.cp-talk.com.cn Consult and take a look!