集裝箱制作完成后的檢驗是為了確保集裝箱質量，并保證集裝箱在使用過程中的性。通常，濟南集裝箱廠家制作完成后的檢驗應包括以下幾個方面：

The inspection after the completion of container production is to ensure the quality of the container and ensure the safety of the container during use. Usually, the inspection conducted by Jinan container manufacturers after production should include the following aspects:

1.外觀檢驗：檢查集裝箱的外觀是否整潔、無明顯破損、劃痕、凹陷等現象，并檢查各個焊接點是否牢固、無焊渣等缺陷。

1. Appearance inspection: Check the appearance of the container for cleanliness, no obvious damage, scratches, dents, etc., and check whether each welding point is firm and free of defects such as welding slag.

2.尺寸檢驗：檢查集裝箱的長、寬、高、厚度等尺寸是否符合設計要求和標準。

2. Dimensional inspection: Check whether the length, width, height, thickness and other dimensions of the container meet the design requirements and national standards.

3.閉門檢驗：檢查集裝箱的門是否完全閉合，密封性是否正常。

3. Closed door inspection: Check whether the door of the container is fully closed and whether the sealing is normal.

4.地板檢驗：檢查集裝箱的地板是否平整、無凹凸不平、沒有松動或者出現破損等現象。

4. Floor inspection: Check whether the floor of the container is flat, free from unevenness, looseness, or damage.

5.內部檢驗：檢查集裝箱內部的角鋼、支撐件是否完好，以及門鎖、焊接是否牢固等。

5. Internal inspection: Check whether the angle steel and support components inside the container are intact, as well as whether the door lock and welding are firm.

6.涂層檢驗：檢查集裝箱的涂層質量是否符合要求，是否存在麻點、氣泡等不良現象。

6. Coating inspection: Check whether the coating quality of the container meets the requirements and whether there are any defects such as pits and bubbles.

7.負載性能檢驗：檢查集裝箱的承載能力，使用負載裝置進行負載測試，檢查集裝箱是否能夠承受設計載荷。

7. Load performance inspection: check the carrying capacity of the container, use the load device to carry out load testing, and check whether the container can bear the design load.

8.防銹防腐檢驗：檢查集裝箱的表面防銹涂層以及內部防腐涂層是否符合要求，并無麻點、氣泡、掉漆等現象。

8. Rust and corrosion prevention inspection: Check whether the surface rust prevention coating and internal corrosion prevention coating of the container meet the requirements, and there are no signs of pitting, bubbles, paint peeling, etc.

以上檢測項目基本涵蓋了集裝箱制作后的檢驗，確保集裝箱制作完成后符合設計標準和標準，使用過程中更加可靠。更多相關疑惑或者需求，就來我們網站http://www.cp-talk.com.cn咨詢吧！

The above inspection items basically cover the comprehensive inspection after container production, ensuring that the container meets the design standards and national standards after production, and is safer and more reliable during use. For more related doubts or needs, come to our website http://www.cp-talk.com.cn Consult!